ELOG GENETIS

Updates and Results Talks and Posters Advice Ideas Important Figures Write-Ups Outreach How-To Funding Opportunities GENETIS

GENETIS

Fields marked with * are required
Entry time:	Wed Apr 3 16:38:07 2019
Author*:
Subject*:
<p><strong><span style="font-size:20px">                                                        </span></strong><u><strong><span style="font-size:20px">General update</span></strong></u></p> <p>The following were the fixes we made to make AraSim run:</p> <p>(1) As of March, the loop breaks at AraSim. We have found that our program XFintoARA.py does not properly format the output in the form that AraSim is looking for (as an input). Jorge gave us a sample AraSim input file to help us edit XFintoARA.py so that it formats the file correctly. Note that we found white space is also must match in order for the format to be correct. </p> <p>Now that we have fixed this, AraSim now runs. Attached is the following sample Jorge gave us of the proper AraSim inputs. If needed, it's available to refer back to. </p> <p>(2) After correcting the AraSim input file formats (outputs of XFintoARA.py), we ran it. It failed to finish running after hours of run time. We found that we were using default input parameters for AraSim -- which wasn't triggering in a timely fashion. Once we edited the parameters, it ran successfully. <em>Note that this was not run within the loop. Confirmation of the full loop running has not been completed. </em></p> <p>The parameters of interest need to be edited in setup.txt. To see which file in AraSim I am referring to, please see the .txt file attached. Note that we will be editing the bash script to allow the user to change these input parameters there. The following <span style="color:#B22222">red lines</span> are what need to be set:</p> <p><em><span style="font-size:11px"><span style="color:#B22222">EXPONENT=21</span><br /> <span style="color:#B22222">NNU=100 // number of neutrino events<br /> NNU_PASSED=10 // number of neutrino events that are allowed to pass the trigger</span><br /> <span style="color:#B22222">ONLY_PASSED_EVENTS=1 // 0 (default): AraSim throws NNU events whether or not they pass; 1: AraSim throws events until the number of events that pass the trigger is equal to NNU_PASSED (WARNING: may cause long run times if reasonable values are not chosen)</span><br /> NOISE_WAVEFORM_GENERATE_MODE=0 // generate new noise waveforms for each events<br /> NOISE_EVENTS=16 // number of pure noise waveforms<br /> <span style="color:#B22222">TRIG_ANALYSIS_MODE=0 // 0 = signal + noise, 1 = signal only, 2 = noise only</span><br /> DETECTOR=1 // ARA stations 1 to 7<br /> NOFZ=1<br /> core_x=10000<br /> core_y=10000</span></em></p> <p><span style="color:#B22222">EXPONENT</span> gives the energy of the neutrinos. Note that higher energies will have more pass, as the energies don't dissipate as rapidly. For now, we are running at this energy. Eventally, we will want to use the full Kotera spectrum. Otherwsie, we would be finding the performance of an antenna at only one energy. Just to check the loop, we are going to use EXPONENT=21 to get events to trigger faster. </p> <p><span style="color:#B22222">ONLY_PASSED_EVENTS</span> decides which of the two options to use to determine when AraSim is finished running: (1) Throws '<span style="color:#B22222">NNU</span>' number of events at antennas and stops regardless of how many pass (in this case <span style="color:#B22222">ONLY_PASSED_EVENTS=0</span>) , or (2) throws as many events at the antenna as needed until '<span style="color:#B22222">NNU_PASSED</span>' number triggers (in this case <span style="color:#B22222">ONLY_PASSED_EVENTS=1</span>). Ie if this number is 10, we throw as many neutrinos at the antenna as necessary until 10 events trigger. Note that this can result in a longer run time. Additionally, a higher <span style="color:#B22222">EXPONENT</span> will make them trigger faster. </p> <p><span style="color:#B22222">TRIG_ANALYSIS_MODE</span> is a setting that determines what is being thrown. Ie- 0=signal + noise (which is what we want, and is the 'real' case), 1=signal only (would make it run faster), 2=noise only (not of interest for us). </p> <p><strong><span style="font-size:18px">       </span></strong></p> <p> </p> <p><strong><span style="font-size:18px">                                                                </span></strong><u><strong><span style="font-size:18px">To-Do List</span></strong></u></p> <p>(1) Commit version of XFintoARA.py since recent formatting change. </p> <p>(2) Figure out how to add in Kotera spectrum (note that we wont want to do this until the WHOLE loop is functional)</p> <p>(3) Edit the bash script to recreat the setup.txt making the variables in <span style="color:#B22222">red</span> above an editable option in the top of the bash script. Ie our variables in <span style="color:#B22222">red</span> above will be at the top of the bash script. Later in the bash script we will need to have it create this .txt file with the user inputs for those variables. We can do this by either (1) creating a skeleton, or (2) creating another .sh script that is run in our XFLoop.sh -- which writes the first handfull of lines based on the user inputs for our variables in <span style="color:#B22222">red</span> above, and then pastes in the rest of what is unchanged in setup.txt. </p> <p>(4) Run the whole loop: update- we tried this today and keep getting a Veff-0 for our first antenna along with the error </p> <p>Warning in <TFile::Init>: no StreamerInfo found in /datapool/software/anita/lib/G__RootFftwWrapper_rdict.pcm therefore preventing schema evolution when reading this file.<br /> Error in <TStreamerInfo::Build>: AraEventCalibrator, discarding: unsigned short* fAtriPeds, no [dimension]<br /> others run as expected</p> <p>(5) Work on the paper: Amy added a skeleton of sections to add for the GA. Date of completion should be in-line with APS. </p> <p>(6) APS talk slides. </p> <p>(7) Edit the manual and add: </p> <ul> <li>The changes that will occur when task (3) is done.</li> <li>A sample of how AraSim inputs -- or XFintoARA.py outputs -- should look. </li> <li>This stuff: <a href="http://radiorm.physics.ohio-state.edu/elog/GENETIS/8">http://radiorm.physics.ohio-state.edu/elog/GENETIS/8</a></li> <li>Max's AraSim plotting software (when it's done)</li> <li>Evelyn and Sophie's plotting software info (when it's done). </li> </ul> <p>(8) Finish Max's AraSim plotting software.</p> <p>(9) Finish Evenlyn and Sophie's plotting softare. </p> Encoding: HTML ELCode plain Suppress Email notification Resubmit as new entry

Attachment 1:	ARA_bicone6in_output.txt freq : 83.33 MHz SWR : 2.18 Theta Phi Gain(dB) Gain Phase(deg) 0 0 -80.83 0.00 -0.41 5 0 -21.10 0.01 168.18 10 0 -15.10 0.03 168.17 15 0 -11.62 0.07 168.14 20 0 -9.19 0.12 168.09 25 0 -7.34 0.18 168.04 30 0 -5.86 0.26 167.97 35 0 -4.65 0.34 167.91 40 0 -3.64 0.43 167.83 45 0 -2.79 0.53 167.76 50 0 -2.08 0.62 167.70 55 0 -1.48 0.71 167.64 60 0 -0.98 0.80 167.59 65 0 -0.57 0.88 167.55 70 0 -0.25 0.94 167.53 75 0 0.00 1.00 167.51 80 0 0.18 1.04 167.50 85 0 0.29 1.07 167.50 90 0 0.32 1.08 167.50 95 0 0.29 1.07 167.50 100 0 0.18 1.04 167.50 105 0 0.01 1.00 167.51 110 0 -0.25 0.94 167.53 115 0 -0.57 0.88 167.55 120 0 -0.98 0.80 167.59 125 0 -1.48 0.71 167.64 130 0 -2.08 0.62 167.70 135 0 -2.79 0.53 167.77 140 0 -3.64 0.43 167.84 145 0 -4.65 0.34 167.91 150 0 -5.86 0.26 167.98 155 0 -7.33 0.18 168.04 160 0 -9.19 0.12 168.10 165 0 -11.62 0.07 168.15 170 0 -15.09 0.03 168.18 175 0 -21.08 0.01 168.21 180 0 -80.83 0.00 179.59 0 5 -80.83 0.00 -0.41 5 5 -21.10 0.01 168.18 10 5 -15.10 0.03 168.17 15 5 -11.62 0.07 168.14 20 5 -9.19 0.12 168.09 25 5 -7.34 0.18 168.04 30 5 -5.86 0.26 167.97 35 5 -4.65 0.34 167.91 40 5 -3.64 0.43 167.83 45 5 -2.79 0.53 167.76 50 5 -2.08 0.62 167.70 55 5 -1.48 0.71 167.64 60 5 -0.98 0.80 167.59 65 5 -0.57 0.88 167.55 70 5 -0.25 0.94 167.53 75 5 0.00 1.00 167.51 80 5 0.18 1.04 167.50 85 5 0.29 1.07 167.50 90 5 0.32 1.08 167.50 95 5 0.29 1.07 167.50 100 5 0.18 1.04 167.50 105 5 0.01 1.00 167.51 110 5 -0.25 0.94 167.53 115 5 -0.57 0.88 167.56 120 5 -0.98 0.80 167.59 125 5 -1.48 0.71 167.64 130 5 -2.08 0.62 167.70 135 5 -2.79 0.53 167.77 140 5 -3.64 0.43 167.84 145 5 -4.65 0.34 167.91 150 5 -5.86 0.26 167.98 155 5 -7.33 0.18 168.04 160 5 -9.19 0.12 168.10 165 5 -11.62 0.07 168.15 170 5 -15.09 0.03 168.18 175 5 -21.08 0.01 168.21 180 5 -80.83 0.00 179.59 0 10 -80.83 0.00 -0.41 5 10 -21.10 0.01 168.18 10 10 -15.10 0.03 168.17 15 10 -11.62 0.07 168.14 20 10 -9.19 0.12 168.09 25 10 -7.34 0.18 168.04 30 10 -5.86 0.26 167.97 35 10 -4.65 0.34 167.91 40 10 -3.64 0.43 167.83 45 10 -2.79 0.53 167.76 50 10 -2.08 0.62 167.70 55 10 -1.48 0.71 167.64 60 10 -0.98 0.80 167.59 65 10 -0.57 0.88 167.55 70 10 -0.25 0.94 167.53 75 10 0.01 1.00 167.51 80 10 0.18 1.04 167.50 85 10 0.29 1.07 167.50 90 10 0.32 1.08 167.50 95 10 0.29 1.07 167.50 100 10 0.18 1.04 167.50 105 10 0.01 1.00 167.51 110 10 -0.24 0.95 167.53 115 10 -0.57 0.88 167.56 120 10 -0.98 0.80 167.59 125 10 -1.48 0.71 167.64 130 10 -2.08 0.62 167.70 135 10 -2.79 0.53 167.77 140 10 -3.64 0.43 167.84 145 10 -4.65 0.34 167.91 150 10 -5.86 0.26 167.98 155 10 -7.33 0.18 168.04 160 10 -9.19 0.12 168.10 165 10 -11.62 0.07 168.15 170 10 -15.09 0.03 168.18 175 10 -21.08 0.01 168.21 180 10 -80.83 0.00 179.59 0 15 -80.83 0.00 -0.41 5 15 -21.10 0.01 168.18 10 15 -15.10 0.03 168.17 15 15 -11.62 0.07 168.14 20 15 -9.19 0.12 168.09 25 15 -7.34 0.18 168.04 30 15 -5.86 0.26 167.97 35 15 -4.65 0.34 167.91 40 15 -3.64 0.43 167.83 45 15 -2.79 0.53 167.76 50 15 -2.08 0.62 167.70 55 15 -1.48 0.71 167.64 60 15 -0.98 0.80 167.59 65 15 -0.57 0.88 167.55 70 15 -0.25 0.94 167.53 75 15 0.01 1.00 167.51 80 15 0.18 1.04 167.50 85 15 0.29 1.07 167.50 90 15 0.32 1.08 167.50 95 15 0.29 1.07 167.50 100 15 0.18 1.04 167.50 105 15 0.01 1.00 167.51 110 15 -0.24 0.95 167.53 115 15 -0.57 0.88 167.56 120 15 -0.98 0.80 167.59 125 15 -1.48 0.71 167.64 130 15 -2.08 0.62 167.70 135 15 -2.79 0.53 167.77 140 15 -3.64 0.43 167.84 145 15 -4.65 0.34 167.91 150 15 -5.86 0.26 167.98 155 15 -7.33 0.18 168.04 160 15 -9.19 0.12 168.10 165 15 -11.62 0.07 168.15 170 15 -15.09 0.03 168.18 175 15 -21.08 0.01 168.21 180 15 -80.83 0.00 179.59 0 20 -80.83 0.00 -0.41 5 20 -21.10 0.01 168.18 10 20 -15.10 0.03 168.17 15 20 -11.62 0.07 168.14 20 20 -9.19 0.12 168.09 25 20 -7.34 0.18 168.04 30 20 -5.86 0.26 167.97 35 20 -4.65 0.34 167.91 40 20 -3.64 0.43 167.83 45 20 -2.79 0.53 167.76 50 20 -2.08 0.62 167.70 55 20 -1.48 0.71 167.64 60 20 -0.98 0.80 167.59 65 20 -0.57 0.88 167.55 70 20 -0.24 0.95 167.53 75 20 0.01 1.00 167.51 80 20 0.18 1.04 167.50 85 20 0.29 1.07 167.50 90 20 0.32 1.08 167.50 95 20 0.29 1.07 167.50 100 20 0.18 1.04 167.50 105 20 0.01 1.00 167.51 110 20 -0.24 0.95 167.53 115 20 -0.57 0.88 167.56 120 20 -0.98 0.80 167.59 125 20 -1.48 0.71 167.64 130 20 -2.08 0.62 167.70 135 20 -2.79 0.53 167.77 140 20 -3.64 0.43 167.84 145 20 -4.65 0.34 167.91 150 20 -5.86 0.26 167.98 155 20 -7.33 0.18 168.04 160 20 -9.19 0.12 168.10 165 20 -11.62 0.07 168.15 170 20 -15.09 0.03 168.18 175 20 -21.08 0.01 168.21 180 20 -80.83 0.00 179.59 0 25 -80.83 0.00 -0.41 5 25 -21.10 0.01 168.18 10 25 -15.10 0.03 168.17 15 25 -11.62 0.07 168.14 20 25 -9.19 0.12 168.09 25 25 -7.34 0.18 168.04 30 25 -5.86 0.26 167.97 35 25 -4.65 0.34 167.91 40 25 -3.64 0.43 167.83 45 25 -2.79 0.53 167.76 50 25 -2.08 0.62 167.70 55 25 -1.48 0.71 167.64 60 25 -0.98 0.80 167.59 65 25 -0.57 0.88 167.55 70 25 -0.24 0.95 167.53 75 25 0.01 1.00 167.51 80 25 0.18 1.04 167.50 85 25 0.29 1.07 167.50 90 25 0.32 1.08 167.50 95 25 0.29 1.07 167.50 100 25 0.18 1.04 167.50 105 25 0.01 1.00 167.51 110 25 -0.24 0.95 167.53 115 25 -0.57 0.88 167.56 120 25 -0.98 0.80 167.59 125 25 -1.48 0.71 167.64 130 25 -2.08 0.62 167.70 135 25 -2.79 0.53 167.77 140 25 -3.64 0.43 167.84 145 25 -4.65 0.34 167.91 150 25 -5.86 0.26 167.98 155 25 -7.33 0.18 168.04 160 25 -9.19 0.12 168.10 165 25 -11.62 0.07 168.15 170 25 -15.09 0.03 168.18 175 25 -21.08 0.01 168.21 180 25 -80.83 0.00 179.59 0 30 -80.83 0.00 -0.41 5 30 -21.10 0.01 168.19 10 30 -15.10 0.03 168.17 15 30 -11.62 0.07 168.14 20 30 -9.19 0.12 168.09 25 30 -7.34 0.18 168.04 30 30 -5.86 0.26 167.98 35 30 -4.65 0.34 167.91 40 30 -3.64 0.43 167.83 45 30 -2.79 0.53 167.76 50 30 -2.08 0.62 167.70 55 30 -1.48 0.71 167.64 60 30 -0.98 0.80 167.59 65 30 -0.57 0.88 167.55 70 30 -0.24 0.95 167.53 75 30 0.01 1.00 167.51 80 30 0.18 1.04 167.50 85 30 0.29 1.07 167.50 90 30 0.32 1.08 167.50 95 30 0.29 1.07 167.50 100 30 0.18 1.04 167.51 105 30 0.01 1.00 167.51 110 30 -0.24 0.95 167.53 115 30 -0.57 0.88 167.56 120 30 -0.98 0.80 167.59 125 30 -1.48 0.71 167.64 130 30 -2.08 0.62 167.70 135 30 -2.79 0.53 167.77 140 30 -3.64 0.43 167.84 145 30 -4.65 0.34 167.91 150 30 -5.86 0.26 167.98 155 30 -7.33 0.18 168.04 160 30 -9.19 0.12 168.10 165 30 -11.62 0.07 168.15 170 30 -15.09 0.03 168.18 175 30 -21.08 0.01 168.21 180 30 -80.83 0.00 179.59 0 35 -80.83 0.00 -0.41 5 35 -21.10 0.01 168.19 10 35 -15.10 0.03 168.17 15 35 -11.62 0.07 168.14 20 35 -9.19 0.12 168.09 25 35 -7.34 0.18 168.04 30 35 -5.86 0.26 167.98 35 35 -4.65 0.34 167.91 40 35 -3.64 0.43 167.83 45 35 -2.79 0.53 167.76 50 35 -2.08 0.62 167.70 55 35 -1.48 0.71 167.64 60 35 -0.98 0.80 167.59 65 35 -0.57 0.88 167.56 70 35 -0.24 0.95 167.53 75 35 0.01 1.00 167.51 80 35 0.18 1.04 167.50 85 35 0.29 1.07 167.50 90 35 0.32 1.08 167.50 95 35 0.29 1.07 167.50 100 35 0.18 1.04 167.51 105 35 0.01 1.00 167.51 110 35 -0.24 0.95 167.53 115 35 -0.57 0.88 167.56 120 35 -0.98 0.80 167.59 125 35 -1.48 0.71 167.64 130 35 -2.08 0.62 167.70 135 35 -2.79 0.53 167.77 140 35 -3.64 0.43 167.84 145 35 -4.65 0.34 167.91 150 35 -5.86 0.26 167.98 155 35 -7.33 0.18 168.04 160 35 -9.18 0.12 168.10 165 35 -11.62 0.07 168.15 170 35 -15.09 0.03 168.18 175 35 -21.08 0.01 168.21 180 35 -80.83 0.00 179.59 0 40 -80.83 0.00 -0.41 ... 159721 more lines ...
Attachment 2:	setup.txt /////////////////// NFOUR=1024 EXPONENT=21 NNU=100 // number of neutrino events NNU_PASSED=10 // number of neutrino events that are allowed to pass the trigger ONLY_PASSED_EVENTS=1 // 0 (default): AraSim throws NNU events whether or not they pass; 1: AraSim throws events until the number of events that pass the trigger is equal to NNU_PASSED (WARNING: may cause long run times if reasonable values are not chosen) NOISE_WAVEFORM_GENERATE_MODE=0 // generate new noise waveforms for each events NOISE_EVENTS=16 // number of pure noise waveforms TRIG_ANALYSIS_MODE=0 // 0 = signal + noise, 1 = signal only, 2 = noise only DETECTOR=1 // ARA stations 1 to 7 NOFZ=1 core_x=10000 core_y=10000 TIMESTEP=5.E-10 // value for 2GHz actual station value TRIG_WINDOW=1.E-7 // 100ns which is actual testbed trig window POWERTHRESHOLD=-6.06 // 100Hz global trig rate for 3 out of 16 ARA stations //DATA_BIN_SIZE=8192 POSNU_RADIUS=3000 V_MIMIC_MODE=0 // 0 : global trig is located center of readout windows DATA_SAVE_MODE=0 // 2 : don't save any waveform informations at all DATA_LIKE_OUTPUT=0 // 0 : don't save any waveform information to eventTree BORE_HOLE_ANTENNA_LAYOUT=0 SECONDARIES=0 // below settings are available for only TestBed mode (DETECTOR=3 case) TRIG_ONLY_BH_ON=0 CALPULSER_ON=0 USE_MANUAL_GAINOFFSET=0 USE_TESTBED_RFCM_ON=0 NOISE_TEMP_MODE=0 TRIG_THRES_MODE=0 READGEOM=0 // reads geometry information from the sqlite file or not (0 : don't read) // new variables //INTERACTION_MODE=0 // pickunbiased mode! //taumodes=1 //BH_ANT_SEP_DIST_ON=0 // default 0 : use constant borehole antenna distance. 1 : use separate antenna distance. use z_btw01, z_btw12, ... in ARA_N_info.txt or ARA37_info.txt TRIG_MODE=0 // use vpol, hpol separated trigger mode. by default N_TRIG_V=3, N_TRIG_H=3. You can change this values //N_TRIG_V=4 //N_TRIG_H=4 number_of_stations=1 core_x=10000 core_y=10000 /////////////////// //DATA_SAVE_MODE=2 // Settings for Arbitrary event generation //EVENT_TYPE=10 // arbitrary event type //INTERACTION_MODE=2 // pick exact location using settings below //POSNU_THETA=1.7 // interaction location elevation angle in radians //POSNU_THETA=-0.5 // interaction location elevation angle in radians //POSNU_PHI=0 // interaction location azimuthal angle in radians //POSNU_R=1000 // interaction location radius in meters //INTERACTION_MODE=4 // pick interaction location within cylindrical volume above the ice //PICK_ABOVE_HEIGHT=3000. // Settings for Station A2-like simulation //DETECTOR=4 //DETECTOR_STATION=2 //DATA_LIKE_OUTPUT=1 ///////////////////////// Other Alternate Settings ////////////////// //POSNU_RADIUS=5000 //RAYSOL_RANGE=7000 //SELECT_FLAVOR=1 //NU_NUBAR_SELECT_MODE=1 //SELECT_CURRENT=1 //default 2: get from ratios in Ghandi etal paper, 0: nc, 1: cc //NNU_THIS_THETA=1 //NNU_THETA=0.785 //NNU_D_THETA=0.0873 //NNU_D_THETA=0.0 //NOISE_EVENTS=16 //NOISE_EVENTS=1 //NOISE=0 //NOISE_TEMP_MODE=1 //ANTENNA_MODE=1 //APPLY_NOISE_FIGURE=1 //ALL_ANT_V_ON=0
Attachment 3:
Drop attachments here...

ELOG V3.1.5-fc6679b