Updates and Results
Talks and Posters
Advice
Ideas
Important Figures
Write-Ups
Outreach
How-To
Funding Opportunities
GENETIS
GENETIS
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Tue Aug 16 11:41:07 2022
Author
*
:
Subject
*
:
<p dir="ltr"><strong>Running IceMC:</strong></p> <p> </p> <p dir="ltr"><strong>Go into the directory ../anitaBuildTool/build/components/icemc/</strong></p> <p dir="ltr">And run the command</p> <ul> <li dir="ltr"> <p dir="ltr">./icemc -i {inputFile} -o {outputDirectory} -r {runNumber} -n {numberOfNeutrinos} -t {triggerThreshold} -e {energyExponent}</p> </li> </ul> <p dir="ltr">*May need to chmod -R 775 ../anitaBuildTool/comonents/icemc/ if you get a permissions error</p> <p> </p> <p dir="ltr"><strong>inputFile:</strong></p> <p dir="ltr">Must be the full path to the file</p> <p dir="ltr">Config files are found in ../anitaBuildTool/components/icemc</p> <p dir="ltr">Ex: /users/PAS1960/dylanwells1629/anitaBuildTool/components/icemc/inputs.anita4.conf</p> <p dir="ltr">Config files are found in ../anitaBuildTool/components/icemc</p> <p> </p> <p dir="ltr"><strong>outputDirectory:</strong></p> <p dir="ltr">Will be made in ../anitaBuildTool/build/components/icemc/ by default, specify full path otherwise.</p> <p> </p> <p dir="ltr"><strong>runNumber: </strong></p> <p dir="ltr">The run number.</p> <p> </p> <p dir="ltr"><strong>numberOfNeutrinos:</strong></p> <p dir="ltr">The number of neutrinos generated in the simulation. </p> <p dir="ltr">Can be found in inputs.conf</p> <p dir="ltr">Default is 2,000,000.</p> <p dir="ltr">#How many neutrinos to generate</p> <p><br /> </p> <p dir="ltr"><strong>triggerThreshold:</strong></p> <p dir="ltr">Threshold for each band for the trigger. </p> <p dir="ltr">Default is 2.3</p> <p dir="ltr">#thresholds for each band- this is only for the frequency domain voltage trigger. If using a different trigger scheme then keep these at the default values of 2.3 because the max among them is used for the chance in hell cuts</p> <p> </p> <p dir="ltr"><strong>energyExponent:</strong></p> <p dir="ltr">The exponent of the energy for the neutrinos</p> <p dir="ltr">Can be found in input.conf </p> <p dir="ltr">Default is 1020</p> <p dir="ltr"># Select energy (just enter the exponent) or (30) for baseline ES&S (1) for E^-1 (2) for E^-2 (3) for E^-3 (4) for E^-4 (5) for ES&S flux with cosmological constant (6) for neutrino GZK flux from Iron nuclei (16-22)not using spectrum but just for a single energy (101-114)use all kinds of theoretical flux models</p>
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Resubmit as new entry
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.5-fc6679b