Input File Format for pueoSim (Also ICEMC)

Frequency Range: From 200 MHz to 1500 MHz incrementing by 10 MHz steps

There are 8 different files that are required for pueoSim. They are:

vv_0: Max Gain at each Frequency, Vertical Polarization

hh_0: Max Gain at each Frequency, Horizontal Polarization

vh_0: Max Gain at each Frequency, Vertical to Horizontal Polarization

hv_0: Max Gain at each Frequency, Horizontal to Vertical Polarization

vv_el: Gain at Theta Angles [5, 10, 20, 30, 45, 90] for each Frequency, Vertical Polarization

vv_az: Gain at Phi Angles [5, 10, 20, 30, 45, 90] for each Frequency, Vertical Polarization

hh_el: Gain at Theta Angles [5, 10, 20, 30, 45, 90] for each Frequency, Horizontal Polarization

hh_az: Gain at Phi Angles [5, 10, 20, 30, 45, 90] for each Frequency, Horizontal Polarization

Currently XF doesn't output all the information we need to create all these files. The only files able to be made from current XF outputs are vv_0, vv_el, and vv_az. Once we have the correct XF Outputs, it shouldn't be too much of a hassle to fix the current translation code.

Format for each of the files are the same. One column is Frequency (Hz) and the other is Gain. Attached are example files vv_0 and vv_el to visually see the format, though the frequency range is the current ARA range and not the final PUEO range as I am using ARA data to make these files. The files are named vv_0 (no .txt or .csv or any extension) and vv_el

Link to Google Doc with this information: https://docs.google.com/document/d/1iRUF6hIEyQfMK0LL21caRuHPgXYP30ZdkSkFv_-Y8R0/edit