Updates and Results
Talks and Posters
Advice
Ideas
Important Figures
Write-Ups
Outreach
How-To
Funding Opportunities
GENETIS
GENETIS
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Fri Jun 5 14:29:56 2020
Author
*
:
Subject
*
:
<table border="1" cellpadding="1" cellspacing="1"> <tbody> <tr> <td>Name</td> <td>Today's Update</td> <td>Plans for Monday</td> </tr> <tr> <td>Alex M.</td> <td> <p>Helped Alex P try to figure out how to get data Amy was asking us to get for comparing antennas in AraSim. We've been stuck trying to figure out where all of the data is printed (there are a bunch of .cc files and quantities we aren't familiar with--for example, vmmhz in Report.cc sounds like the V/Mhz with the effective heights folded in, but we aren't sure). </p> <p>I worked on some things in the paper that were mentioned in the minutes from last week's meeting, but I didn't see Amy's comments til the GENETIS meeting. </p> </td> <td> <p>Monday morning Amy might stop by to talk to Alex and I about AraSim so we can try to find some of the info we haven't been able to print out. We'll also watch out for anything she posts in slack about it.</p> <p>We'll present an outline of the paper at 12 on monday to the Ara group meeting to see if it needs to be an ARA paper or not. </p> <p>I'm also going to keep looking for how to use the automatic grid spacing (and I'm planning on enlisting Eliot and Leo's help in being able to look at models in XF to make sure XF is designing antennas correctly).</p> </td> </tr> <tr> <td> <p>Alex P.</p> </td> <td>Worked with Alex to find the volts/MHz after folding in the effective heights. While doing this we noticed a possible bug in AraSim. Currently our settings have a blank value for SIMULATION_MODE and a documentation we found says the default should be 0 but inside of AraSim the default is actually 1. Now Report.cc only uses volts/MHz if the SIMULATION MODE is set equal to 0 so this could've been an oversight when making the setup file if someone assumed leaving it blank would be zero.</td> <td>After checking whether the simulation mode is intended or an oversight, we want to check on the Volts/MHz and then also work on automatically setting the grid spacing and possibly work on implementing a penalty in the fitness score for antennas that get too small.</td> </tr> <tr> <td>Eliot & Leo</td> <td> <p> </p> </td> <td> <p> </p> </td> </tr> <tr> <td>Evelyn</td> <td> </td> <td> </td> </tr> <tr> <td>Ryan</td> <td> </td> <td> </td> </tr> </tbody> </table> <p> </p>
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Resubmit as new entry
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.5-fc6679b