Updates and Results Talks and Posters Advice Ideas Important Figures Write-Ups Outreach How-To Funding Opportunities GENETIS
  GENETIS, Page 13 of 14  ELOG logo
Entry  Thu Aug 18 13:03:47 2022, Dylan Wells, Comparing inputs and outputs between AraSim and IceMC 
Comparing Inputs:

Frequency Lists:

Ara - 83.33MHz - 1066.70 MHz, step = 13.33MHz
Entry  Tue Jun 28 13:27:13 2022, Dylan Wells, Changes needed for the matching circuit script 


Fix the functions for the SLPC, SCPL, and PLSC L networks (change the paramaters to match with the format of
our data)


Write the PCSL function
Entry  Mon Jun 2 14:10:59 2025, Jacob Weiler, Building Status 06/02/2025 Building_Dump_of_Useful_Materials.txtSimulating_Building_Model.txtBuilding_Dump.txtdone_with_change_materials.zip
We are almost to where we can start the physical building of the antenna! 

I've attached all the information I currently have regarding the building project. Some of it is messy work notes and some is well-structured.

I’ve attached the following files for the GENETIS building project:
Entry  Mon Feb 13 14:56:57 2023, Jack Tillman, Building - Physics Plots for 9_50, 13_84, 18_89, 19_96, 29_87 Antennae Genetis_Physics_Plot_Comparison_Slides.pdf
Physics plots were created for 300K events from the higher statistic simulation results for the 9_50, 13_84, 18_89, 19_96, and 29_87 antennae. 

The simulation was inaccurate because a discrepancy exists between the higher simulation physics plots and the physics plots created for the
300K event results currently in the GENETIS Loop. This can be seen in the attached pdf file. 
Entry  Thu Jul 6 14:52:09 2023, Jack Tillman, Building - Matching Circuit Schematic, PCB, and components Matching_Circuit_Schematic.pngMatching_Circuit_PCB.pngMatching_Circuit_DigiKey_Cart.pdfMatching_Circuit_DigiKey_Cart.csv
Attached are images of the matching circuit schematic and PCB design. A parts list is also attached in .pdf and .csv format. The .csv format can be imported
into Digikey if necessary.  

Table of component values:
Entry  Fri Feb 10 15:55:53 2023, Jack Tillman, Building - Matching Circuit PCB LPS5050_Dimensioned_PCB.pngLPS6235_Dimensioned_PCB.png
I've completed laying out the PCB for the 14-rung matching circuit. Attached are png files of two PCB designs. One uses LPS5050 inductors while the
other uses LPS6235 inductors. The dimensions shown are in millimeters. 
Entry  Tue Jan 31 11:30:54 2023, Audrey Zinn, Building XF_model_13_84.txtXF_model_9_50.txtXF_model_18_89.txtXF_model_19_96.txtXF_model_29_87.txt
Attached are the XF files for the top 5 individuals from the 2022_12_29 crazy sides run. In order from best to 5th best: 

1: Gen 29 Indiv 87

2: Gen 19 Indiv 96
Entry  Wed Feb 6 17:28:29 2019, Julie Rolla, Bicone User Manual (w/ links to Dipole work) GENETIS_Manual_1_25_19.pdf
Hi all, 

 

The working copy of the user manual can be found here: https://www.overleaf.com/6955763886pjtkckprxsyp
Entry  Thu Nov 7 16:55:00 2019, Cade Sbrocco, Archiving Old Genetis Manual GENETIS_Manual.pdf
 
Entry  Wed Apr 3 16:38:07 2019, Julie Rolla, AraSim update ARA_bicone6in_output.txtsetup.txt
                                
                       General update

The following were the fixes we made to make AraSim run:
Entry  Mon Feb 20 12:33:20 2023, Dennis H. Calderon, AraSim Simulations for Top 5 Antennas (12/2022) with Higher Stats Crazy_Sides_Triggered_Event_Data.pdf
AraSim Simulations for Top 5 Antennas from 12/2022 Run with 3 million simulated events

Simulated using Arasim version currently used in GENETIS Loop

/fs/ess/PAS1960/BiconeEvolutionOSC/AraSim/
Entry  Tue May 21 09:55:57 2024, Jacob Weiler, AraSim CSE Spring 2024 Work 
# AraSim CSE Spring 2024 Work

## Goals 
The main goal was to get a working multithreaded version of the AraSim codebase working. Doing this, the hope was to learn how to multithread the
Entry  Fri Mar 25 17:14:01 2022, Alex M, Antenna Minimum Length Investigation polar_plot_283.37.png
The reviewer of the paper we are trying to publish (as well as other external colleagues we showed the paper to) asked about our minimum length we implemented
in the loop. Currently, we cut off the length at a minimum of 37.5 cm for each cone (minimum of 75 cm for the full cone). There is an ELOG post from Amy
that presented the reasoning for this ( http://radiorm.physics.ohio-state.edu/elog/GENETIS/81 ). We initially thought that we needed a minimum because
Entry  Thu Dec 5 14:32:54 2019, Julie Rolla, Adding Constraints To-Do List AddingConstraints.pdf
In my last post, I mentioned (1) our to-do list for adding the ARA hole constraints, and (2) that we've made a mistake upon implementing it. I've
attached detailed steps of that to-do list that I've written, as well as an explanation for the correction that is currently being worked on. Please
see the pdf attached for an explanation of corrections. 
Entry  Tue Apr 11 00:36:49 2023, Bryan Reynolds, AREA physics of results plot first look 20230410_AREA_PoR_CosTheta_bestIndiv_singleFreqTest.PNG20230201_singleFreqTest_100NPop_fitnessPlot_10Gens.PNG20230410_AREA_mostFitIndivReUpload_singleFreqTest.PNG
After some work, I've gotten the physics of results plotting script provided by Dennis working to compare the ARASim outputs from an AREA run to
a set of reference data for the ARA bicone (provided by Alex). Among the outputs is a histogram of of events triggered vs cos(theta_nu) (attached here).
This is the plot that was previously presented in GENETIS talks in the physics of results discussion.
Entry  Thu May 11 15:57:08 2023, Ryan Debolt, Byran Reynolds, AREA Updates 
Here is some backlogged information as well as recent updates to our progress on AREA and its optimizations:

4/13/2023

We concluded our initial test of the AREA optimization loop. While analyzing our results, we noticed that most of our runs never reached our
Entry  Fri Apr 8 16:06:31 2022, Aidan Snyder, AREA - frequency linear dependence correlation test run - 04/05/2022  

Run Type

AREA


Run Date

04/05/2022


Run Name

20220405fahimi5run2


Why
are we doing this run?

to see if the linear dependence on frequency was properly implemented


What is different
about this run from the last?

Under closer examination, the previous run of AREA appeared to not linearly depend on frequency, so we recompiled
Entry  Sun Apr 5 15:07:50 2026, Aidan Snyder, AREA - frequency linear dependence correlation test run - 04/05/2022  

Run Type

AREA


Run Date

04/05/2022


Run Name

20220405fahimi5run2


Why
are we doing this run?

to see if the linear dependence on frequency was properly implemented


What is different
about this run from the last?

Under closer examination, the previous run of AREA appeared to not linearly depend on frequency, so we recompiled
Entry  Fri Feb 11 16:34:54 2022, Aidan Snyder, AREA - frequency linear dependence correlation test run - 01/18/2022 Screenshot_2022-02-11_164514.pngScreenshot_2022-02-11_164136.pngScreenshot_2022-02-11_164252.pngScreenshot_2022-02-11_164406.png

Run Type

AREA


Run Date

01/18/22


Run Name

20220118fahimi5run1


Why
are we doing this run?

to see if the linear dependence on frequency was properly implemented


What is different
about this run from the last?

attempted to evolve gain pattern as a linear function of frequency


Symmetric, asymmetric,
Entry  Tue Apr 19 17:46:07 2022, Aidan Snyder, AREA - Short run testing stringReplacement2.py - 04/19/2022 

Run Type

AREA


Run Date

04/19/22


Run Name

20220419fahimi5run1


Why
are we doing this run?

Check to see if stringReplacement2.py changes were successfull


What is different about
this run from the last?

added below code in order to create a fitness file inside of each generation to display the fitness scores for just
ELOG V3.1.5-fc6679b